The behavior of two parallel non-symmetric cracks in piezoelectric materials subjected to the anti-plane shear loading was studied by the Schmidt method for the permeable crack electric boundary conditions. Through the Fourier transform, the present problem can be solved with two pairs of dual integral equations ip which the unknown variables are the jumps of displacements across crack surfaces. To solve the dual integral equations, the jumps of displacements across crack surfaces were directly expanded in a series of Jacobi polynomials. Finally, the relations between electric displacement intensity factors and stress intensity factors at crack tips can be obtained. Numerical examples are provided to show the effect of the distance between two cracks upon stress and electric displacement intensity factors at crack tips. Contrary to the impermeable crack surface condition solution, it is found that electric displacement intensity factors for the permeable crack surface conditions are much smaller than those for the impermeable crack surface conditions. At the same time, it can be found that the crack shielding effect is also present in the piezoelectric materials.
Residual stresses in ion-implanted NiTi alloy are measured by a combined method of Moiré interferometry and hole-drilling. Oxy-gen ions are implanted into the NiTi alloy under a voltage of 30 kV by a dose of 1.0×1017 ions/cm2 for one hour. Subsequently, in order to avoid dimensional error, a hole is drilled exactly in the center of the sample. The distribution of residual stresses around the hole is measured. It is indicated that the method which combines the Moiré interferometry with hole-drilling is able to be used to measure resid-ual stresses produced by ion implantation.
Using a polarization method, the scattering problem for a two-dimensional inclusion embedded in infinite piezoelectric/piezomagnetic matrices is investigated. To achieve the purpose, the polarization method for a two-dimensional piezoelectric/piezo-magnetic "comparison body" is formulated. For simple harmonic motion, kernel of the polarization method reduces to a 2-D time-harmonic Green's function, which is obtained using the Radon transform. The expression is further simplified under conditions of low frequency of the incident wave and small diameter of the inclusion. Some analytical expressions are obtained. The analytical solutions for generalized piezoelectric/piezomagnetic anisotropic composites are given followed by simplified results for piezoelectric composites. Based on the latter results, two numerical results are provided for an elliptical cylindrical inclusion in a PZT-5H-matrix, showing the effect of different factors including size, shape, material properties, and piezoelectricity on the scattering cross-section.
The vertical and lateral interactions in a multisheet array of InAs/GaAs quantum dots are analyzed by finite element method(FEM).It is shown that due to the effects of vertical interaction,nucleation prefers to happen above buried quantum dots(QDs).Meanwhile,the effects of lateral interaction adjust the spacing of lateral neighboring QDs.The vertical coupling becomes strong with deceasing GaAs spacer height and increasing number of buried layers,while the lateral coupling becomes strong with increasing InAs wetting layer thickness. The phenomenon that,after successive layers,the spacing and size of QDs islands become progressively more uniform is explained according to the minimum potential energy theory.
Ferroelectric domain switching under low voltage or short pulses is of interest for the development of high-density random access memory (FRAM) devices. Being necessarily very small in size, instability and back switching often occur when the external voltage is removed, which creates serious problems. In this investigation, a general approach to determine the minimum size of ferroelectric domain to avoid back switching was developed, and as an example, a 180°domain in a ferroelectric thin film covered by the upper and lower electrodes was considered in detail. We note that our approach is generally applicable to many other fields, including phase transformation, nucleation and expansion of dislocation loops in thin films, etc.
The dynamic interaction of two collinear interface cracks between two dissimilar functionally graded piezoelectric/piezomagnetic material strips subjected to the anti-plane shear harmonic stress waves was investigated. By using the Fourier transform, the problem can be solved with the help of a pair of triple integral equations in which the unknown variable is jump of displacement across the crack surfaces. These equations are solved using the Schmidt method. Numerical examples are provided to show the effect of the functionally graded parameter, the circular frequency of the incident waves and the thickness of the strip upon stress, electric displacement and magnetic flux intensity factors of cracks.
