Lead extraction from spent lead–acid battery paste in a molten Na2CO3 salt containing Zn O as a sulfur-fixing agent was studied. Some influencing factors, including smelting temperature, reaction time, Zn O and salt dosages, were investigated in detail using single-factor experiments. The optimum conditions were determined as follows: T = 880°C; t = 60 min; Na2CO3/paste mass ratio = 2.8:1; and the Zn O dosage is equal to the stoichiometric requirement. Under the optimum conditions, the direct recovery rate of lead reached 98.14%. The results suggested that increases in temperature and salt dosage improved the direct recovery rate of lead. XRD results and thermodynamic calculations indicated that the reaction approaches of lead and sulfur were Pb SO4→Pb and Pb SO4→Zn S, respectively. Sulfur was fixed in the form of Zn S, whereas the molten salt did not react with other components, serving only as a reaction medium.
