This paper systematically investigates the response of colloidal liquids containing magnetic holes of different volume densities to magnetic field by conventional transmission measurements. It finds that the enhancement in the transmission of such a colloidal liquid under a magnetic field exhibits a strong dependence on the volume density of magnetic holes. A linear increase in the maximum enhancement factor is observed when the volume density of magnetic holes is below a critical level at which a maximum enhancement factor of ~150 is achieved in the near infrared region. Once the volume density of magnetic holes exceeds the critical level, a sharp drop of the maximum enhancement factor to ~2 is observed. After that, the maximum enhancement factor increases gradually till a large volume density of ~9%. By monitoring the arrangement of magnetic holes under a magnetic field, it reveals that the colloidal liquids can be classified into three different phases, i.e., the gas-like, liquid-like and solid-like phases, depending on the volume density of magnetic holes. The response behaviour of colloidal liquids to magnetic field is determined by the interaction between magnetic holes which is governed mainly by their volume density. A phase transition, which is manifested in the dramatic reduction in the maximum enhancement factor, is clearly observed between the liquid-like and solid-like phases. The optical switching operations for colloidal liquids in different phases are compared and the underlying physical mechanisms are discussed.
This paper demonstrates experimentally and numerically that a significant modification of spontaneous emission rate can be achieved near the surface of a three-dimensional photonic crystal. In experiments, semiconductor coreshell quantum dots are intentionally confined in a thin polymer film on which a three-dimensional colloidal photonic crystal is fabricated. The spontaneous emission rate of quantum dots is characterised by conventional and time-resolved photoluminescence （PL） measurements. The modification of the spontaneous emission rate, which is reflected in the change of spectral shape and PL lifetime, is clearly observed. While an obvious increase in the PL lifetime is found at most wavelengths in the band gap, a significant reduction in the PL lifetime by one order of magnitude is observed at the short-wavelength band edge. Numerical simulation reveals a periodic modulation of spontaneous emission rate with decreasing modulation strength when an emitter is moved away from the surface of the photonic crystal. It is supported by the fact that the modification of spontaneous emission rate is not pronounced for quantum dots distributed in a thick polymer film where both enhancement and suppression are present simultaneously. This finding provides a simple and effective way for improving the performance of light emitting devices.
This paper demonstrates the realization of an optical switch by optically manipulating a large number of polystyrene spheres contained in a capillary. The strong scattering force exerted on polystyrene spheres with a large diameter of 4.3 μm is employed to realize the switching operation. A transparent window is opened for the signal light when the polystyrene spheres originally located at the beam centre are driven out of the beam region by the strong scattering force induced by the control light. The switching dynamics under different incident powers is investigated and compared with that observed in the optical switch based on the formation of optical matter. It is found that a large extinction ratio of - 30 dB and fast switching-on and switching-off times can be achieved in this type of switch.
