During the operation and installation of offshore pipelines, high axial forces and pressures are experienced, and their effects cannot be neglected. In this article, the effect of internal flow velocity and functional loads on vortex-induced vibration （VIV） response is investigated. On the basis of the Hamilton principle, a differential equation was derived to describe the motion of a pinned-pinned tensioned spanning pipeline conveying fluid. The VIV response was calculated according to DNV-RP-F105 under different functional loads. The results showed that functional loads influence free spanning pipeline VIV response by changing the natural frequency. Internal flow velocity was found less important for VIV response than other functional load factors, such as effective axial force, because the speed in reality is not high enough to be significant. The research may provide a reference for sensitivity studies of the effect of functional loads on allowable free span lengths.
The mechanical performance of a flexible riser is more outstanding than other risers in violent environmental conditions. Based on the lumped mass method, a steep wave flexible riser configuration attached to a Floating Production Storage and Offioading （FPSO） has been applied to a global analysis in order to acquire the static and dynamic behavior of the flexible riser. The riser was divided into a series of straight massless line segments with a node at each end. Only the axial and torsional properties of the line were modeled, while the mass, weight, and buoyancy were all lumped to the nodes. Four different buoyancy module lengths have been made to demonstrate the importance of mode selection, so as to confirm the optimum buoyancy module length. The results in the sensitivity study show that the flexible riser is not very sensitive to the ocean current, and the buoyancy module can reduce the Von Mises stress and improve the mechanical performance of the flexible riser. Shorter buoyancy module length can reduce the riser effective tension in a specific range of the buoyancy module length when other parameters are constant, but it can also increase the maximum curvature of the riser. As a result, all kinds of the riser performances should be taken into account in order to select the most appropriate buoyancy module length.
