A CMOS front-end integrated circuit consisting of 16 identical analog channels is proposed for semiconductor radiation detectors. Each of the 16 channels has a low noise charge sensitive amplifier, a pulse shaper, a peak detect and hold circuit and a discriminator, while analog voltage and channel address are routed off the chip. It can accommodate both electron and hole collection with selectable gain and peaking time. Sequential and sparse readout, combining with self-trigger and external trigger, makes four readout modes. The circuit is implemented in a 0.35 μm DP4M (double-poly-quad-metal) CMOS technology with an area of 2.5×1.54 mm2 and power dissipation of 60 mW. A single channel chip is tested with Verigy 93000. The gain is adjustable from 13 to 130 mV·fC–1 while the peaking time varies between 0.7 and 1.6 μs. The linearity is more than 99% and the equivalent noise charge is about 600e.
A low-noise readout integrated circuit for high-energy particle detector is presented.The noise of charge sensitive amplifier was suppressed by using single-side amplifier and resistors as source degeneration.Continuous-time semi-Gaussian filter is chosen to avoid switch noise.The peaking time of pulse shaper and the gain can be programmed to satisfy multi-application.The readout integrated circuit has been designed and fabricated using a 0.35 μm double-poly triple-metal CMOS technology.Test results show the functions of the readout integrated circuit are correct.The equivalent noise charge with no detector connected is 500–700 e in the typical mode,the gain is tunable within 13–130 mV/fC and the peaking time varies from 0.7 to 1.6 μs,in which the average gain is about 20.5 mV/fC,and the linearity reaches 99.2%.
ZHANG Mingming CHEN Zhongjian ZHANG Yacong LU Wengao JI Lijiu
