We report a monolithic integrated dual-wavelength laser diode based on a distributed Bragg reflector （DBR） composite resonant cavity. The device consists of three sections, a DBR grating section, a passive phase section, and an active gain section. The gain section facet is cleaved to work as a laser cavity mirror. The other laser mirror is the DBR grating, which also functions as a wavelength filter and can control the number of wavelengths involved in the laser action. The reflection bandwidth of the DBR grating is fabricated to have an appropriate value to make the device work at the dual-wavelength lasing state. We adopt the quantum well intermixing （QWI） technique to provide low-absorption loss grating and passive phase section in the fabrication process. By tuning the injection currents on the DBR and the gain sections, the device can generate 0.596 nm-spaced dual-wavelength lasing at room temperature.
A scheme for photonic generation of ultra-wideband （UWB） pulses using a semiconductor optical amplifier （SOA） and an electro-absorber （EA） in parallel is proposed and numerically demonstrated. By adjusting the time delay between two pump signals incident into the SOA and the EA, we can obtain monocycle pulses with reversed polarities and different bandwidths. The proposed method is flexible in pulse shaping and easy in practical optimization.
A novel scalable and integrated design that supports optical multicast and burst amplification is proposed and demonstrated experimentally. The powers of incoming signals can be tuned to optimize the results of burst amplification and replication. Experimental results also show that erbium-doped optical Fiber amplication （EDFA） transients can be suppressed to an equally low level regardless of the burst parameters. Extended structure designs are further proposed to satisfy the need of mass replication of multicast signals.
