A new type of two-dimensional self-consistent fluid model that couples an equivalent circuit module is used to in- vestigate the mode transition characteristics and hysteresis in hydrogen inductively coupled plasmas at different pressures, by varying the series capacitance of the matching box. The variations of the electron density, temperature, and the circuit electrical properties are presented. As cycling the matching capacitance, at high pressure both the discontinuity and hysteresis appear for the plasma parameters and the transferred impedances of both the inductive and capacitive discharge components, while at low pressure only the discontinuity is seen. The simulations predict that the sheath plays a determi- native role on the presence of discontinuity and hysteresis at high pressure, by influencing the inductive coupling efficiency of applied power. Moreover, the values of the plasma transferred impedances at different pressures are compared, and the larger plasma inductance at low pressure due to less collision frequency, as analyzed, is the reason why the hysteresis is not seen at low pressure, even with a wider sheath. Besides, the behaviors of the coil voltage and current parameters during the mode transitions are investigated. They both increase （decrease） at the E to H （H to E） mode transition, indicating an improved （worsened） inductive power coupling efficiency.
A Langmuir probe and an ICCD are employed to study the discharge mode transition in Ar inductively coupled plasma. Electron density and plasma emission intensity are measured during the E （capacitive discharge） to H （inductive discharge） mode transitions at different pressures. It is found that plasma exists with a low electron density and a weak emission intensity in the E mode, while it has a high electron density and a strong emission intensity in the H mode. Meanwhile, the plasma emission intensity spatial （2D an asymmetric profile in the E mode. Moreover, the at high pressure, but increase almost continuously at image） profile is symmetrical in the H mode, but the 2D image is electron density and emission intensity jump up discontinuously the E to H mode transition under low pressure.
Changes of the electron dynamics in hydrogen （H2） radio-frequency （RF） inductively coupled plasmas are investigated using a hairpin probe and an intensified charged coupled device （ICCD）. The electron density, plasma emission intensity, and input current （voltage） are measured during the E to H mode transitions at different pressures. It is found that the electron density, plasma emission intensity, and input current jump up discontinuously, and the input voltage jumps down at the E to H mode transition points. And the threshold power of the E to H mode transition decreases with the increase of the pressure. Moreover, space and phase resolved optical emission spectroscopic measurements reveal that, in the E mode, the RF dynamics is characterized by one dominant excitation per RF cycle, while in the H mode, there are two excitation maxima within one cycle.
The inflexion point of electron density and effective electron temperature curves versus radio-frequency （RF） bias voltage is observed in the H mode of inductively coupled plasmas （ICPs）. The electron energy probability function （EEPF） evolves first from a Maxwellian to a Druyvesteyn-like distribution, and then to a Maxwellian distribution again as the RF bias voltage increases. This can be explained by the interaction of two distinct bias-induced mechanisms, that is： bias- induced electron heating and bias-induced ion acceleration loss and the decrease of the effective discharge volume due to the sheath expansion. Furthermore, the trend of electron density is verified by a fluid model combined with a sheath module.
