The non-destructive testing(NDT)of debonding in stainless steel composites plate(SSCP)is performed by infrared thermography,finite element analysis(FEA)software ANSYS is taken as the simulative tool,and 2D simulative model has been set up to investigate effect of the thickness of coating and/or substrate on the detectibility of debonging in SSCPs.Two parameters,namely the maximum defect temperature difference and defect appearing index,are defined to evaluate the detectivity of defects,and their computational methods and formulas are given respectively.The preliminary changing tendency of the maximum defect temperature difference and defect appearing index with the thickness of coating and/or substrate is found by numerical simulation.
The feasibility of electromagnetically stimulated thermography non-destructive testing(NDT)for the detection of defects in metallic conductive materials has been carried out by finite element analysis.Aluminum plates with defects of different diameters,depths,locations,shapes and orientation with respect to eddy current are numerically investigated.ANSYS software is used to solve the coupled electromagnetic and temperature field equations.The peak temperatures on the top surface of circular defects with different diameters and depths are calculated at varying excitation frequencies.It is demonstrated that the obtained temperature inreases with increase of the defect diameter and decrease of its depth.The dependence of the temperature over the top surface of the defect on its location and orientation is also presented.The results indicate that we can detect the subsurface defect and estimate its depth and location by choosing a suitable coil-specimen configuration.