A computational study was firstly performed in this work to examine the applicability of an acid-functionalized metal-organic framework(MOF), Ui O-66(Zr)-(COOH)2, in membrane-based H2S/CH4 separation. The results show that this MOF could be potentially interesting when being used as the pure membrane material for the separation of the mixture with low H2 S concentration. Further, the performance of 10 different mixed matrix membranes(MMMs) on the basis of the MOF was predicted by combing the molecular simulation data and the Maxwell permeation model. The results indicate that using this MOF as filler particles in MMMs can signi ficantly enhance the permeation performance of pure polymers. The findings obtained in this work may be helpful in facilitating the application of this promising MOF for practical desulfurization process of fuel gas.
Metal-organic framework MIL-53(Al) was synthesized by a solvothermal method using aluminum nitrate as the aluminium source and 1,4-benzenedicarboxylic acid(H2BDC) as the organic ligand. The structure of samples was characterized by X-ray diffraction(XRD) and Fourier transform infrared spectroscopy(FT-IR). The catalytic activity and recyclability of MIL-53(Al) catalyst for the Friedel-Crafts acylation reaction of indole with benzoyl chloride were evaluated. The reaction conditions were optimized and a reaction mechanism was suggested. The results showed that the MIL-53(Al) catalyst exhibited good catalytic activity and recyclability for the Friedel-Crafts acylation reaction. When the molar ratio of indole and MIL-53(Al) catalyst was 1:0.06(n1:ncatalyst), the molar ratio of indole and benzoyl chloride was 1:3, and the solvent was dichloromethane, the conversion of indole could reach 97.1% and the selectivity of 3-acylindole could reach 81.1% at 25 °C after 8 h. The catalyst can be reused without significant degradation in catalytic activity. After the catalyst was reused five times, the conversion of indole was 87.6% and the selectivity of 3-acylindole was 79.5%.
