The effects of MoO3thin buffer layer on charge carrier injection and extraction in inverted configuration ITO/ZnO/MEH-PPV(poly(2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene))/MoO3(0,5 nm)/Ag hybrid solar cells are investigated by capacitance–voltage measurement under dark and light illumination conditions.The efficiency of charge carrier injection and extraction is enhanced by inserting 5 nm MoO3thin layer,resulting in better device performances.Charge carrier transport of the whole device is improved and the interface energy barrier is reduced by inserting 5 nm MoO3thin buffer layer.The device fill factor is increased from 54.1%to 57.5%after modifying 5 nm MoO3.Simulations and experimental results consistently show that in the forward voltage under dark,the device with the 5 nm MoO3thin layer modification generates larger value of capacitance than the device without MoO3layer.While under illumination,the device with the 5 nm MoO3layer generates smaller value of capacitance than the device without the 5 nm MoO3layer in the bias region of reverse and before the peak position of maximum capacitance(VCmax).The underlying mechanism of the MoO3anode buffer layer on device current density–voltage characteristics is discussed.
Wei GongZheng XuSuling ZhaoXiaodong LiuXing FanQianqian YangChao Kong
