In order to improve the rutting resistance of asphalt mixtures in the middle course to reduce the rutting of asphalt pavement, the influence of different types of gradation with their own optimal asphaltaggregate ratios is analyzed. Some investigations are made out on the mixture in the middle course through the modified wheel tracking test in air bath and the Hamburg wheel tracking test （HWTT） in water bath, and the results of which are compared with the corresponding research in Germany. Results show that the Sup20 and the modified AC-20I have better performance than that of AC-20I under the same test conditions. In addition, the high-quality bitumen and hard aggregate can improve the rutting performance of the mixture in water-submerged conditions. The selection of modified asphalt, hard aggregate and a reasonable gradation are essential to the improvement of the rutting resistance of the mixtures used in the middle course.
Through the shear tests on composite specimens using four different kinds of tack coat material （epoxy resin, SBS modified emulsified asphalt, SBS modified asphalt and H# bridge waterproof material）, the bond condition between layers of porous asphalt pavement under traffic load, temperature variation and moisture situation is evaluated. The test results show that the bond strength decreases with the rise in temperature, and the relationship between shear strength and temperature can be expressed by a logarithm curve at a high reliability. Under the action of traffic load, the value of shear strength of the mixture right under the centre of the wheel track is smaller than that of other parts of the pavement. It is also found that some effects concerning moisture have comparative effects on the bonding of the two layers. Given all the results achieved during the study, it will be quite rewarding to make rational comparisons during selecting the sound type of tack coat.
